Sublimation ink printing seems wire drawing, blurring, and offset?

Sublimation ink printing seems wire drawing, blurring, and offset?

Blog Article

Why does sublimation ink printing show up wire drawing, blurring, and offset? How to resolve it? SUBLICOOL will exhibit you.
Fault phenomenon
The part of the textual content or sample drags out “burrs”, the line is damaged or the coloration is missing. And skinny and lengthy wire-like wire drawing seems at the junction of the shade blocks.

Possible motives and solutions

Nozzle offset
Reason: The print nozzle is offset and the ink jet path is now not vertical.

Solution: Calibrate the nozzle function and verify that the nozzle is now not tilted.

Unstable poor pressure
Reason: The ink provide machine leaks or the ink sac is aging.

Solution: Check whether or not the ink tube is leaking, substitute the growing old ink sac. Besides, alter the terrible stress price to the manufacturer’s advocated range.

Warping edge
Reason: The warmness switch sublimation paper is warped or now not flat, ensuing in ink pulling.

Solution: Preheat the heating platform/flatten the paper with the suction platform.

Pattern blur/ghosting
Fault phenomenon
The traces are weak, the edges of the picture are now not sharp, the colorations are mixed, the mild and darkish stages can't be pulled apart. Possible motives and solutions

Insufficient switch temperature or pressure
Reason: Short warm urgent time, inadequate temperature, and uneven pressure.

Solution: Adjust the parameters of the press (usually 190-220℃, 20-30 seconds).

Poor nice of dye sublimation paper
Reason: Low-quality sublimation paper has inadequate launch charge and the ink do now not absolutely transfer.

Solution: Replace with high-release sublimation paper. Besides, check specific manufacturers and choose switch media that fits the ink.